HOW TO SET UP YOUR PORTABLE AERIAL RIG

Here is a quick video to assist you in the easiest way to assemble your Aerial Supplies Australia Portable Aerial Rig with telescopic legs.

Pieces Included:

Top Bar
2x Leg Brackets
4x Legs

2x Top Bar Rigging Points
2x Leg Straps
Pins

Steps needed to set your rig up:

1. Ensure the ground is level and solid, allowing around 4 × 4 metres of space for set-up. Less space is needed if you don’t set it up to full height.
2. Begin with the top bar. Lay it down and slide on the figure-eight rigging points, using one or two depending on whether your apparatus is single or double point. Locate the push-in buttons on each side of the top bar. Align one leg bracket, push in the button, and slide the leg bracket onto the top bar, ensuring the button pops back out of the bracket hole.
3. Repeat this step for the other side.
4. Start with one leg. Each leg is made up of three internal poles that slide out within each other. Familiarise yourself with how these poles slide out in three sections before attaching them to the rig, to make set-up easier. When assembling, start by sliding out the middle pole first, followed by the innermost pole, to your desired height to keep the rig balanced and even.
5. Attach one leg (without any pole extensions yet) to the leg bracket. Rotate the leg slightly so the holes align with the bracket, then insert the pin through both aligned holes and secure. Do not extend yet.
6. Attach the second, third, and fourth legs the same way as the first. We recommend having a second person available to assist with set-up.
7. Once all legs are secured, you can start extending them to your desired height. Begin with one leg, extending via the middle pole. Once it’s at your desired height, ensure the holes align (a slight twist may be needed) and secure with the pin. Repeat the middle pole extension for all legs. If you wish to extend to full height, first pull out and secure the middle pole, followed by the innermost pole. Once the innermost pole is at the desired height, secure it with the pin and repeat on all legs.
8. Ensure the rig is level and that pins are placed in the same positions on each leg on the same poles. Counting the holes from the base to the pin can help ensure consistency.
9. Before attaching your apparatus, tightly secure the figure-eight rigging points to the top bar.
10. Attach the leg straps to parallel sides of the rig.
11. Fly high and enjoy your new portable rig!